Dongguan Niceone Electronics Technology Co., Ltd.

Membrane Switches in Industrial Controls

Niceone-tech has produced many membrane switches for industrial control parts. When it comes to such products, these products may have to be used against very harsh environments including dust, outdoors, and changing weather, even under long-term UV exposure. Therefore, we must design a membrane switch that can meet the needs of customers. It must have a performance of IP65, resist ultraviolet rays, and so on.

Contact us
Membrane Switches in Industrial Controls
Temperature Resistant
Temperature Resistant
Sealed
Sealed
UV Resistant
UV Resistant

Solutions And Functions Of Customized Membrane Panel Switches In Industrial Control Interfaces

1. Membrane switch with backlight can be selected

2. EMI/ESD/RFI can be used as a shield for membrane switches

3. The choice of stainless steel, gold-plated, nickel-plated dome is based on customer requirements. If you want to lower the resistance of the membrane switch, then we highly recommend the use of gold-plated shrapnel or nickel-plated shrapnel.

4. Kapton Flex circuit, PET printed circuit, or PCB circuit.

5. Membrane switches generally have ZIF, FEMALE, or Male. If the brand is selected, there are generally CJT, Nicomatic, Molex, etc.

6. Membrane keys also have different options.


Solutions And Functions Of Customized Silicone Buttons

In the industrial controller part, silicone buttons have always been a very good choice. Because it can customize different structures according to the needs of different customers. It can even form a silicone membrane switch with a membrane circuit. The excellent physical and chemical properties of silicone rubber make it a higher level when used as a membrane switch panel.



1. The silicone rubber keyboard keys can be glued, which makes them feel better and the logo of the keys can be protected.

2. Conductive carbon pills, silver pills, and gold pills. If low resistance is required, we highly recommend the latter.

3. Silicone buttons need to be transparent, Niceone-tech will use laser etching.

4. UV protection material

5. Antibacterial material

6. PU coating, or feel oil

7. Can be combined with membrane switch to form a silicone membrane switch.


Copper Flex As a Circuit Advantage

1. Low resistance relative to PET as a line.

2. The pitch of the line can reach 0.5mm

3. More heat resistant

4. Waterproof performance is better than PET

5. Can be bent without causing an open circuit

6. Routing can be more complicated.


Membrane keypad Inquiry
Contact Us
Membrane keypad Inquiry
Custom membrane switches and panels at Niceone Tech for fluent human machine interface.
NewS & BLOG
Niceone Tech Blog
Structural Performance of Film Switches
29
Aug
2023
Structural Performance of Film Switches
Membrane switch is an operating system that integrates key functions, indicator components, and instrument panels. It consists of four parts: panel, upper circuit, isolation layer, and lower circuit.G...
23
Aug
2023
Assembly Process of Thin Film Switch
1. The first step in the assembly of membrane switchesPlace the printed circuit into the oven and bake for 40 minutes at a temperature of 115 degrees Celsius. (Note: The circuit with printed lines sho...
17
Aug
2023
Thin Film Switch: The Control Core of Modern Electronic Products
The typical structure of a membrane switch is a multi-layer structure consisting of an insulating material and a conductive material with a certain elasticity. It is a flat, self-locking push-button s...